Stone Crusher

Stone crusher machine is suitable for soft or hard and very hard and broken, and widely used in all kinds of ores, cement, refractories, aluminum where soil clinker, mechanism building sand and a variety of metallurgical slag.Big crushing ratio, high production capacity, product uniformity, energy consumption per unit of product is low, simple structure, light weight, easy operation and maintenance etc.

Describes The Basic Process Of Stone Production Line

Chunks of stone by the silo consists of vibrating feeder evenly sent to jaw crusher for primary crushing, crushing stone post by belt conveyor to the crusher for further crushing; after stone crushing by conveyor belt shaker sent for screening, screening out several different sizes of stones, gravel meet the size requirements of the finished product conveyor belt sent the finished windrow; stones does not meet the size requirements of the belt conveyor feed back to counterattack crusher for crushing again, forming a closed loop several times. Finished size can be combined and graded according to the needs of users, to protect the environment, can be equipped with auxiliary dust removal equipment.

Operation Of Stone Crushers

  • 1. In case the stone crusher unit is in the vicinity of a water body, the unit must be
    provided with garland canal and / or suitable drainage system around the site, to
    collect the dust-laden storm water runoff. The drains shall be connected to a suitably
    designed holding tank to allow settlement of dust. The tank water shall be suitably
    disposed off or used for dust control spraying. The settled dust in the tank shall be
    removed periodically and used to make concrete blocks etc.
  • 2. The crusher unit shall be provided with suitable control measures like hood and
    centrifugal system to prevent the escape of dust.
  • 3. The crusher unit shall be provided with suitable water sprinkling system to
    reduce the dust from each generation area.
  • 4. The crusher unit shall be provided with suitable wind breaking wall to arrest
    the dust blown out of the premises.
  • 5. The road inside the crusher premises shall be metalled.
  • 6. The Suspended Particular Matter measured between 3 meters and 10 meters from
    any process equipment of a stone crusher unit shall not exceed 600 microgram per
    cubic meter as prescribed under

Stone Crusher machine Production Line Performance Introduction

  • 1. The stone production line high degree of automation, complete production line in addition to equipment and routine maintenance of the boot down, almost no manual operation. Its production of high efficiency, low operating cost, high yield, high yield, finished stones uniform size, grain shape is good, in line with the national high-speed material requirements.
  • 2. Device Configuration stone production line is mainly based on customer specifications and production of stone and stone use to make sure that we provide pre-sale, sale and comprehensive services, based on customer production site to the configuration process, for customers to achieve the most reasonable economic production line.
  • 3. I plant design stone crusher and screening equipment in the design process, due to broken equipment levels match the reasonable and rigorous cross-space layout, so it has a small footprint, high investment cost, quality aggregates well, the output rate and other characteristics of the powder is also equipped with advanced electronic control operating system, to ensure that the entire process the material smooth, reliable, easy to operate, energy efficient.
  • Request for Quotation

    You can get the price list and a SBM representative will contact you within one business day.