Cleaning The Crusher Improves Sand Production Efficiency

Summary

Crushers are often in sand mills or mining areas and other powder-bearing, high sand content of the environment to carry out operations, daily maintenance and maintenance work is inevitable, of which cleaning parts, important rotating parts is also a major maintenance work. If the crusher is not cle

You May Be Interested In

Detailed Introduction

Crushers are often in sand mills or mining areas and other powder-bearing, high sand content of the environment to carry out operations, daily maintenance and maintenance work is inevitable, of which cleaning parts, important rotating parts is also a major maintenance work. If the crusher is not cleaned or cleaned up for a long time, long-term use and production process of the accumulation of dust will inevitably affect the yield and quality of finished sand, so the user must pay attention to the clean-up work. In this paper, from the following 3 important parts of the analysis, how to do a good job of crushing equipment cleaning and maintenance.

Cleaning of crusher belts, crushing cavities, and mouth parts

The degree of tightness and operation of the triangular belt affects whether the crusher will be produced smoothly, and it is necessary to keep the belt and the pulley clean at all times, often erasing the dust above. As the sand stone aggregate is put into the machine, the sand in the cavity of the liner, plate hammer or hammer head and other consumables began to play a role in squeezing and the impact of the material, so before the crusher started, it is necessary to clean up the crushing cavity, mainly to check whether there is non-crushing, residue, etc., such as residual debris containing the previous process, Clean it with a towel or brush to avoid carrying too much pressure and load after powering on. Whether it is the inlet or the discharge port, must be kept clean, to avoid excess debris into it, resulting in uneven feeding and discharge or non-standard.

Cleaning the crusher improves sand production efficiency

Through the cleaning of the crushing equipment, it can be found that the load of the crusher is reduced, the finished product does not contain excess dust and impurities, to ensure the quality of the finished product, the production of sand will meet the national construction sand standards. The clean-up work is also to check the rotation site, the damage to the broken part, to ensure that it plays a normal working condition, thereby improving the production efficiency of the crusher.

Hot Products