Method For Preventing Main Shaft Breakage Of Cone Crusher

Summary

Cone crusher, as a common equipment in the crushed stone production line, is often located in the middle or fine crushing stage. Once the cone crusher fails, it will affect the subsequent processing and operation, and will bring certain losses to the enterprise. In order to avoid this situation, we

You May Be Interested In

Detailed Introduction

Cone crusher, as a common equipment in the crushed stone production line, is often located in the middle or fine crushing stage. Once the cone crusher fails, it will affect the subsequent processing and operation, and will bring certain losses to the enterprise. In order to avoid this situation, we should prevent the crusher from failures in daily operations and routine maintenance. The main shaft is an important internal part of the cone crusher. The common failure is the phenomenon of the main shaft breaking.

First of all, we need to understand the following reasons for the breakage of the cone-breaking main shaft. The main reasons for the breakage of the main shaft of the cone crusher are factors such as unreasonable feeding, equipment aging, foreign materials in the material, damage to the internal components and damage to the main shaft. From these perspectives to protect the main shaft of the cone crusher. The material in the cone crusher is generally fed by the feeder, so we should pay attention to the feeding situation and material situation of the feeder. The feeding should be reasonable, avoid too much or too little, too much may cause the main shaft If it breaks, too little wastes energy, and the material conveyed by the feeder cannot contain iron pieces that are difficult to break. You can add an iron measuring device to the feeder equipment to detect the situation of the material in time.

Secondly, the staff should focus on checking the aging and wear conditions inside the cone crusher during daily maintenance. They need to be replaced directly after aging. They can be used for a period of time when the degree of wear is light.

In addition, in order to ensure the continuity of the entire production line, we should do a good job of backing up the main shaft of the cone crusher and other parts to avoid the lack of suitable accessories after damage. When the lubricating oil of the cone crusher is lacking, the specified lubricating oil should be added in time. Only when the lubrication and maintenance work of the cone crusher is in place, the machine can run in an orderly manner and can bring economic benefits to the enterprise. The method of spindle breakage, hope to help users.

Hot Products